Want to extend tool life and eliminate disposable filter costs?
Consider our Custom Magnetic Coolant Separators.
We can customize for Surface Grinding, Honing, Gear Cutting, and CNC Milling operations.
They continuously remove ferrous chips, swarf, and fines.
Filter water-soluble coolants and cutting oils.
Paper-bed filters can clog and require expensive media changes.
The ‘Paperless’ magnetic separators use a high-intensity rotating drum.
They strip ferrous contaminants from the fluid stream automatically.
Keep your coolant clean.
You prevent re-circulation of metal fines
And reduce hazardous waste disposal costs.
They are the primary cause of poor surface finish (Ra).
And premature grinding wheel wear.
Engineering & Operation Mechanics
Continuous Separation Cycle:
Dirty coolant flows into the inlet channel.
And passes under a rotating magnetic drum.
Ferrous particles are captured instantly by the magnetic field.
Meanwhile, clean coolant flows over a weir into your tank.
Dry Sludge Discharge:
A heavy-duty Gum Rubber Squeegee Roller presses against the accumulated swarf on the drum.
Squeez out expensive coolant back into the system.
Positive Scraper Blade:
A hardened stainless steel or spring-steel scraper blade peels the semi-dry sludge off the drum.
Discharge it into a waste bin.
This ensures the drum surface is always clean and ready for the next rotation.
Customization Options
A. Magnetic Circuit Intensity
Standard Ferrite (Ceramic) Series:
Best for Milling & Turning.
Designed to capture large chips, spirals, and coarse swarf.
High-Intensity Rare Earth (Neodymium) Series:
Best for Grinding, Honing & Lapping.
Essential for capturing microscopic “fines” and cast-iron dust.
They typically pass through standard magnets.
These particles form a “sludge” that destroys pumps if not removed.
B. Flow Rate & Dimensions
Single Drum Units:
For individual CNC machines (flow rates from 20 L/min to 200 L/min).
Multi-Drum / Wide Drum Systems:
Custom-engineered arrays for Central Coolant Systems (1,000+ L/min).
Capable of handling the entire shop floor’s filtration.
C. Mounting & Integration
Tank-Mounted:
We supply the unit ready to bolt onto your existing coolant reservoir.
Complete Skid Systems:
We can fabricate the entire assembly.
Include the Dirty Tank, Clean Tank, Transfer Pumps.
And Control Panel for a turnkey filtration solution.
Stop throwing away expensive coolant
Dirty coolant breeds bacteria and ruins surface finishes.
A magnetic separator pays for itself in reduced coolant purchases alone.
Sizing Calculator:
Send us your Flow Rate (GPM or L/min), Viscosity (Water/Oil).
And Operation Type (Grinding/Milling).
We will size the correct drum width and magnetic intensity for your machine.
